ChanServ

In order to message ChanServ use either /ChanServ command_you_want_to_use or /msg Chanserv@services.travian.org command_you_want_to_use.

• HELP
  

   ChanServ allows you to register and control various
   aspects of channels.  ChanServ can often prevent
   malicious users from "taking over" channels by limiting
   who is allowed channel operator privileges.  Available
   commands are listed below; to use them, type
  
   /ChanServ command.  For more information on a
   specific command, type /ChanServ HELP command.
  
   
   
  

• EXPIRES
  

   
   Note that any channel which is not used for <num> days
   (i.e. which no user on the channel`s access list enters
  
   for that period of time) will be automatically dropped.
  
  

• REGISTER
  

   Syntax: /ChanServ  REGISTER channel password description
  
   
   Registers a channel in the ChanServ database.  In order
   to use this command, you must first be a channel operator
  
   on the channel you`re trying to register.  The password
   is used with the IDENTIFY command to allow others to
   make changes to the channel settings at a later time.
   The last parameter, which must be included, is a
   general description of the channel`s purpose.
   
   When you register a channel, you are recorded as the
   "founder" of the channel.  The channel founder is allowed
  
   to change all of the channel settings for the channel;
   ChanServ will also automatically give the founder
   channel-operator privileges when s/he enters the channel.
  
   See the ACCESS command (%RChanServ HELP ACCESS) for
   information on giving a subset of these privileges to
   other channel users.
   
   NOTICE: In order to register a channel, you must have
   first registered your nickname.  If you haven`t,
   %RChanServ HELP for information on how to do so.
  
  
  

• IDENTIFY
  

   Syntax: /ChanServ  IDENTIFY channel password
  
   
   Authenticates you to ChanServ as the founder of the given
   channel.  Many commands require you to use this command
   before using them.  The password should be the same one
   you sent with the REGISTER command.
  
   
  

• LOGOUT
  

   Syntax: /ChanServ  LOGOUT channel nickname
  
   
   This command will log the selected nickname out meaning they
   would have to reidentify themselves to regain their access.
   
   If you are the founder of the channel, you can log out anybody,
   else you can only log out yourself.
  
  
  

• DROP
  

   Syntax: /ChanServ  DROP channel
   
   Unregisters the named channel.  Can only be used by
   channel founder, who must use the IDENTIFY command first.
  
  
  

• SET
  

   Syntax: /ChanServ  SET channel option parameters
  
   
   Allows the channel founder to set various channel options
   and other information.
   
  
   Available options:
   
       FOUNDER       Set the founder of a channel
       SUCCESSOR     Set the successor for a channel
       PASSWORD      Set the founder password
       DESC          Set the channel description
       URL           Associate a URL with the channel
       EMAIL         Associate an E-mail address with the channel
  
       ENTRYMSG      Set a message to be sent to users when they
                        enter the channel
  
       BANTYPE       Set how Services make bans on the channel
       MLOCK         Lock channel modes on or off
       KEEPTOPIC     Retain topic when channel is not in use
       OPNOTICE      Send a notice when OP/DEOP commands are used
       PEACE         Regulate the use of critical commands
       PRIVATE       Hide channel from LIST command
       RESTRICTED    Restrict access to the channel
  
       SECURE        Activate ChanServ security features
       SECUREOPS     Stricter control of chanop status
  
       SECUREFOUNDER Stricter control of channel founder status
       SIGNKICK      Sign kicks that are done with KICK command
       TOPICLOCK     Topic can only be changed with TOPIC
       XOP           Toggle the user privilege system
   
   Type %RChanServ HELP SET option for more information on a
  
   particular option.
  
  

• SET FOUNDER
  

   Syntax: /ChanServ  SET channel FOUNDER nick
  
   
   Changes the founder of a channel.  The new nickname must
   be a registered one.
  
  

• SET SUCCESSOR
  

   Syntax: /ChanServ  SET channel SUCCESSOR nick
  
   
   Changes the successor of a channel.  If the founder`s
  
   nickname expires or is dropped while the channel is still
   registered, the successor will become the new founder of the
   channel.  However, if the successor already has too many
   channels registered (<num>), the channel will be dropped
   instead, just as if no successor had been set.  The new
   nickname must be a registered one.
  
  

• SET PASSWORD
  

   Syntax: /ChanServ  SET channel PASSWORD password
  
   
   Sets the password used to identify as the founder of the
   channel.
  
  

• SET DESC
  

   Syntax: /ChanServ  SET channel DESC description
   
   Sets the description for the channel, which shows up with
  
   the LIST and INFO commands.
  
  
  

• SET URL
  

   Syntax: /ChanServ  SET channel URL [url]
  
   
   Associates the given URL with the channel.  This URL will
   be displayed whenever someone requests information on the
   channel with the INFO command.  If no parameter is given,
  
   deletes any current URL for the channel.
  
  

• SET EMAIL
  

   Syntax: /ChanServ  SET channel EMAIL [address]
  
   
   Associates the given E-mail address with the channel.
   This address will be displayed whenever someone requests
   information on the channel with the INFO command.  If no
  
   parameter is given, deletes any current E-mail address for
   the channel.
  
  

• SET ENTRYMSG
  

   Syntax: /ChanServ  SET channel ENTRYMSG [message]
  
   
   Sets the message which will be sent via /notice to users
   when they enter the channel.  If no parameter is given,
  
   causes no message to be sent upon entering the channel.
  
  

• SET BANTYPE
  

   Syntax: /ChanServ  SET channel BANTYPE bantype
   
   Sets the ban type that will be used by services whenever
  
   they need to ban someone from your channel.
   
   bantype is a number between 0 and 3 that means:
  
   
   0: ban in the form *!user@host
   1: ban in the form *!*user@host
   2: ban in the form *!*@host
   3: ban in the form *!*user@*.domain
  
  

• SET KEEPTOPIC
  

   Syntax: /ChanServ  SET channel KEEPTOPIC {ON | OFF}
  
   
   Enables or disables the topic retention option for a
  
   channel.  When topic retention is set, the topic for the
   channel will be remembered by ChanServ even after the
   last user leaves the channel, and will be restored the
   next time the channel is created.
  
  

• SET TOPICLOCK
  

   Syntax: /ChanServ  SET channel TOPICLOCK {ON | OFF}
  
   
   Enables or disables the topic lock option for a channel.
   When topic lock is set, ChanServ will not allow the
   channel topic to be changed except via the TOPIC
   command.
  
  

• SET MLOCK
  

   Syntax: /ChanServ  SET channel MLOCK modes
  
   
   Sets the mode-lock parameter for the channel. ChanServ
   allows you to define certain channel modes to be always
   on, off or free to be either on or off.
   
   The modes parameter is constructed exactly the same way
   as a /MODE command; that is, modes followed by a + are
   locked on, and modes followed by a - are locked off. Note,
   however, that unlike the /MODE command, each use of
  
  
   SET MLOCK will remove all modes previously locked before
   setting the new!
   
   Warning:  If you set a mode-locked key, as in the second
   example below, you should also set the RESTRICTED option for
   the channel (see HELP SET RESTRICTED), or anyone entering
   the channel when it is empty will be able to see the key!
   
  
   Examples:
   
       SET #channel MLOCK +nt-iklps
           Forces modes n and t on, and modes i, k, l, p, and
           s off.  Mode m is left free to be either on or off.
   
       SET #channel MLOCK +knst-ilmp my-key
           Forces modes k, n, s, and t on, and modes i, l, m,
           and p off.  Also forces the channel key to be
  
  
           "my-key".
   
       SET #channel MLOCK +
           Removes the mode lock; all channel modes are free
           to be either on or off.
  
  

• SET PEACE
  

   Syntax: /ChanServ  SET channel PEACE {ON | OFF}
  
   
   Enables or disables the peace option for a channel.
   When peace is set, an user won`t be able to kick,
   ban or remove a channel status of an user that has
   a уровень superior or equal to his via ChanServ commands.
  
  

• SET PRIVATE
  

   Syntax: /ChanServ  SET channel PRIVATE {ON | OFF}
  
   
   Enables or disables the private option for a channel.
   When private is set, a %RChanServ LIST will not
   include the channel in any lists.
  
  

• SET RESTRICTED
  

   Syntax: /ChanServ  SET channel RESTRICTED {ON | OFF}
  
   
   Enables or disables the restricted access option for a
   channel.  When restricted access is set, users who would
   normally be disallowed from having channel operator
   privileges (users with negative access уровеньs and, if
   secure ops is set, users not on the access list) will
   instead be kicked and banned from the channel.
  
  

• SET SECURE
  

   Syntax: /ChanServ  SET channel SECURE {ON | OFF}
  
   
   Enables or disables ChanServ`s security features for a
   channel.  When SECURE is set, only users who have
   registered their nicknames with ChanServ and IDENTIFY`d
  
   with their password will be given access to the channel
   as controlled by the access list.
  
  

• SET SECUREOPS
  

   Syntax: /ChanServ  SET channel SECUREOPS {ON | OFF}
  
   
   Enables or disables the secure ops option for a channel.
  
   When secure ops is set, users who are not on the userlist
   will not be allowed chanop status.
   
  

• SET SECUREFOUNDER
  

   Syntax: /ChanServ  SET channel SECUREFOUNDER {ON | OFF}
  
   
   Enables or disables the secure founder option for a channel.
   When secure founder is set, only the real founder will be
   able to drop the channel, change its password, its founder and its
   successor, and not those who are IDENTIFY`d with ChanServ.
   
  

• SET SIGNKICK
  

   Syntax: /ChanServ  SET channel SIGNKICK {ON | LEVEL | OFF}
  
   
   Enables or disables signed kicks for a
   channel.  When SIGNKICK is set, kicks issued with
   ChanServ KICK command will have the nick that used the
   command in their reason.
   
   If you use LEVEL, those who have a уровень that is superior
   or equal to the SIGNKICK уровень on the channel won`t have their
   kicks signed. See %RChanServ HELP LEVELS for more information.
  
  
  
  

• SET XOP
  

   Syntax: /ChanServ  SET channel XOP {ON | OFF}
   
   Enables or disables the xOP lists system for a channel.
   When XOP is set, you have to use the AOP/SOP/VOP
  
   commands in order to give channel privileges to
   users, else you have to use the ACCESS command.
   
   Technical Note: when you switch from access list to xOP
   lists system, your уровень definitions and user уровеньs will be
   changed, so you won`t find the same values if you
   switch back to access system!
   
   You should also check that your users are in the good xOP
   list after the switch from access to xOP lists, because the
   guess is not always perfect... in fact, it is not recommended
   to use the xOP lists if you changed уровень definitions with
  
   the LEVELS command.
  
   
   Switching from xOP lists system to access list system
   causes no problem though.
  
  

• SET OPNOTICE
  

   Syntax: /ChanServ  SET channel OPNOTICE {ON | OFF}
  
   
   Enables or disables the op-notice option for a channel.
  
   When op-notice is set, ChanServ will send a notice to the
   channel whenever the OP or DEOP commands are used for a user
   in the channel.
  
  
  

• AOP
  

   Syntax: /ChanServ  AOP channel ADD nick
  
           AOP channel DEL {nick | entry-num | list}
  
           AOP channel LIST [mask | list]
  
           AOP channel CLEAR
  
   
   Maintains the AOP (AutoOP) list for a channel. The AOP
   list gives users the right to be auto-opped on your channel,
   to unban or invite themselves if needed, to have their
   greet message showed on join, and so on.
  
   
   The AOP ADD command adds the given nickname to the
   AOP list.
  
   
   The AOP DEL command removes the given nick from the
   AOP list.  If a list of entry numbers is given, those
   entries are deleted.  (See the example for LIST below.)
   
   The AOP LIST command displays the AOP list.  If
  
   a wildcard mask is given, only those entries matching the
   mask are displayed.  If a list of entry numbers is given,
   only those entries are shown; for example:
  
      AOP #channel LIST 2-5,7-9
  
         Lists AOP entries numbered 2 through 5 and
         7 through 9.
   
   The AOP CLEAR command clears all entries of the
   AOP list.
   
  
   The AOP ADD and AOP DEL commands are limited to
  
   SOPs or above, while the AOP CLEAR command can only
   be used by the channel founder. However, any user on the
   AOP list may use the AOP LIST command.
   
  
   This command may have been disabled for your channel, and
   in that case you need to use the access list. See
   %RChanServ HELP ACCESS for information about the access list,
   and %RChanServ HELP SET XOP to know how to toggle between
  
   the access list and xOP list systems.
  
  

• HOP
  

   Syntax: /ChanServ  HOP channel ADD nick
  
           HOP channel DEL {nick | entry-num | list}
  
           HOP channel LIST [mask | list]
  
           HOP channel CLEAR
  
   
   Maintains the HOP (HalfOP) list for a channel. The HOP
   list gives users the right to be auto-halfopped on your
   channel.
   
  
   The HOP ADD command adds the given nickname to the
   HOP list.
  
   
   The HOP DEL command removes the given nick from the
   HOP list.  If a list of entry numbers is given, those
   entries are deleted.  (See the example for LIST below.)
   
   The HOP LIST command displays the HOP list.  If
  
   a wildcard mask is given, only those entries matching the
   mask are displayed.  If a list of entry numbers is given,
   only those entries are shown; for example:
  
      HOP #channel LIST 2-5,7-9
  
         Lists HOP entries numbered 2 through 5 and
         7 through 9.
   
   The HOP CLEAR command clears all entries of the
   HOP list.
   
  
   The HOP ADD, HOP DEL and HOP LIST commands are
  
   limited to AOPs or above, while the HOP CLEAR command
   can only be used by the channel founder.
   
   This command may have been disabled for your channel, and
   in that case you need to use the access list. See
  
   %RChanServ HELP ACCESS for information about the access list,
   and %RChanServ HELP SET XOP to know how to toggle between
   the access list and xOP list systems.
  
  

• SOP
  

   Syntax: /ChanServ  SOP channel ADD nick
  
           SOP channel DEL {nick | entry-num | list}
  
           SOP channel LIST [mask | list]
  
           SOP channel CLEAR
  
   
   Maintains the SOP (SuperOP) list for a channel. The SOP
   list gives users all rights given by the AOP list, and adds
   those needed to use the AutoKick and the BadWords lists,
   to send and read channel memos, and so on.
  
   
   The SOP ADD command adds the given nickname to the
   SOP list.
  
   
   The SOP DEL command removes the given nick from the
   SOP list.  If a list of entry numbers is given, those
   entries are deleted.  (See the example for LIST below.)
   
   The SOP LIST command displays the SOP list.  If
  
   a wildcard mask is given, only those entries matching the
   mask are displayed.  If a list of entry numbers is given,
   only those entries are shown; for example:
  
      SOP #channel LIST 2-5,7-9
  
         Lists AOP entries numbered 2 through 5 and
         7 through 9.
   
   The SOP CLEAR command clears all entries of the
   SOP list.
   
  
   The SOP ADD, SOP DEL and SOP CLEAR commands are
  
   limited to the channel founder. However, any user on the
   AOP list may use the SOP LIST command.
   
   This command may have been disabled for your channel, and
   in that case you need to use the access list. See
  
   %RChanServ HELP ACCESS for information about the access list,
   and %RChanServ HELP SET XOP to know how to toggle between
   the access list and xOP list systems.
  
  

• VOP
  

   Syntax: /ChanServ  VOP channel ADD nick
  
           VOP channel DEL {nick | entry-num | list}
  
           VOP channel LIST [mask | list]
  
           VOP channel CLEAR
  
   
   Maintains the VOP (VOicePeople) list for a channel.
   The VOP list allows users to be auto-voiced and to voice
   themselves if they aren`t.
   
  
   The VOP ADD command adds the given nickname to the
   VOP list.
  
   
   The VOP DEL command removes the given nick from the
   VOP list.  If a list of entry numbers is given, those
   entries are deleted.  (See the example for LIST below.)
   
   The VOP LIST command displays the VOP list.  If
  
   a wildcard mask is given, only those entries matching the
   mask are displayed.  If a list of entry numbers is given,
   only those entries are shown; for example:
  
      VOP #channel LIST 2-5,7-9
  
         Lists VOP entries numbered 2 through 5 and
         7 through 9.
   
   The VOP CLEAR command clears all entries of the
   VOP list.
   
  
   The VOP ADD, VOP DEL and VOP LIST commands are
  
   limited to AOPs or above, while the VOP CLEAR command
   can only be used by the channel founder.
   
   This command may have been disabled for your channel, and
   in that case you need to use the access list. See
  
   %RChanServ HELP ACCESS for information about the access list,
   and %RChanServ HELP SET XOP to know how to toggle between
   the access list and xOP list systems.
  
  

• ACCESS
  

   Syntax: /ChanServ  ACCESS channel ADD nick уровень
  
           ACCESS channel DEL {nick | entry-num | list}
  
           ACCESS channel LIST [mask | list]
  
           ACCESS channel CLEAR
  
   
   Maintains the access list for a channel.  The access
   list specifies which users are allowed chanop status or
   access to ChanServ commands on the channel.  Different
   user уровеньs allow for access to different subsets of
   privileges; %RChanServ HELP ACCESS LEVELS for more
  
   specific information.  Any nick not on the access list has
   a user уровень of 0.
   
   The ACCESS ADD command adds the given nickname to the
  
   access list with the given user уровень; if the nick is
   already present on the list, its access уровень is changed to
   the уровень specified in the command.  The уровень specified
   must be less than that of the user giving the command, and
   if the nick is already on the access list, the current
  
   access уровень of that nick must be less than the access уровень
   of the user giving the command.
   
   The ACCESS DEL command removes the given nick from the
  
   access list.  If a list of entry numbers is given, those
   entries are deleted.  (See the example for LIST below.)
   
   The ACCESS LIST command displays the access list.  If
   a wildcard mask is given, only those entries matching the
   mask are displayed.  If a list of entry numbers is given,
   only those entries are shown; for example:
  
  
      ACCESS #channel LIST 2-5,7-9
         Lists access entries numbered 2 through 5 and
         7 through 9.
  
   
   The ACCESS CLEAR command clears all entries of the
   access list.
  
  

• ACCESS LEVELS
  

   User access уровеньs
  
   
   By default, the following access уровеньs are defined:
   
      Founder   Full access to ChanServ functions; automatic
  
                        opping upon entering channel.  Note
                        that only one person may have founder
                        status (it cannot be given using the
                        ACCESS command).
  
           10   Access to AKICK command; automatic opping.
            5   Automatic opping.
  
            3   Automatic voicing.
            0   No special privileges; can be opped by other
  
                        ops (unless secure-ops is set).
           <0   May not be opped.
  
   
   These уровеньs may be changed, or new ones added, using the
   LEVELS command; type %RChanServ HELP LEVELS for
  
   information.
  
  

• AKICK
  

   Syntax: /ChanServ  AKICK channel ADD mask [reason]
  
           AKICK channel STICK mask
  
           AKICK channel UNSTICK mask
           AKICK channel DEL mask
  
           AKICK channel LIST [mask]
  
           AKICK channel VIEW [mask]
  
           AKICK channel ENFORCE
           AKICK channel CLEAR
  
   
   Maintains the AutoKick list for a channel.  If a user
  
   on the AutoKick list attempts to join the channel,
   ChanServ will ban that user from the channel, then kick
   the user.
   
   The AKICK ADD command adds the given nick or usermask
   to the AutoKick list.  If a reason is given with
  
   the command, that reason will be used when the user is
   kicked; if not, the default reason is "You have been
   banned from the channel".
   
   The AKICK STICK command permanently bans the given mask
  
   on the channel. If someone tries to remove the ban, ChanServ
   will automatically set it again. You can`t use it for
   registered nicks.
   
   The AKICK UNSTICK command cancels the effect of the
   AKICK STICK command, so you`ll be able to unset the
  
   ban again on the channel.
   
   The AKICK DEL command removes the given nick or mask
  
   from the AutoKick list.  It does not, however, remove any
   bans placed by an AutoKick; those must be removed
   manually.
   
   The AKICK LIST command displays the AutoKick list, or
   optionally only those AutoKick entries which match the
   given mask.
   
  
   The AKICK VIEW command is a more verbose version of
   AKICK LIST command.
  
   
   The AKICK ENFORCE command causes ChanServ to enforce the
   current AKICK list by removing those users who match an
   AKICK mask.
   
   The AKICK CLEAR command clears all entries of the
  
   akick list.
  
  

• LEVELS
  

   Syntax: /ChanServ  LEVELS channel SET type уровень
  
           LEVELS channel {DIS | DISABLE} type
  
           LEVELS channel LIST
           LEVELS channel RESET
  
   
   The LEVELS command allows fine control over the meaning of
  
   the numeric access уровеньs used for channels.  With this
   command, you can define the access уровень required for most
   of ChanServ`s functions.  (The SET FOUNDER and SET PASSWORD
   commands, as well as this command, are always restricted to
   the channel founder.)
   
   LEVELS SET allows the access уровень for a function or group of
  
   functions to be changed.  LEVELS DISABLE (or DIS for short)
  
   disables an automatic feature or disallows access to a
   function by anyone other than the channel founder.
   LEVELS LIST shows the current уровеньs for each function or
   group of functions.  LEVELS RESET resets the уровеньs to the
   default уровеньs of a newly-created channel (see
  
   HELP ACCESS LEVELS).
   
   For a list of the features and functions whose уровеньs can be
   set, see HELP LEVELS DESC.
  
  
  

• INFO
  

   Syntax: /ChanServ  INFO channel [ALL]
  
   
   Lists information about the named registered channel,
   including its founder, time of registration, last time
   used, description, and mode lock, if any. If ALL is
  
   specified, the entry message and successor will also
   be displayed.
   
   By default, the ALL option is limited to those with
   founder access on the channel.
  
  

• LIST
  

   Syntax: /ChanServ  LIST pattern
  
   
  
   Lists all registered channels matching the given pattern.
   (Channels with the PRIVATE option set are not listed.)
  
  

• OP
  

   Syntax: /ChanServ  OP [#channel [nick]]
  
   
   Ops a selected nick on a channel. If nick is not given,
   it will op you. If channel and nick are not given,
   it will op you on all channels you`re on, provided you
   have the rights to.
   
   By default, limited to AOPs or those with уровень 5 access
   and above on the channel.
  
  

• DEOP
  

   Syntax: /ChanServ  DEOP [#channel [nick]]
  
   
   Deops a selected nick on a channel. If nick is not given,
   it will deop you. If channel and nick are not given,
   it will deop you on all channels you`re on, provided you
   have the rights to.
   
   By default, limited to AOPs or those with уровень 5 access
   and above on the channel.
   
  

• VOICE
  

   Syntax: /ChanServ  VOICE [#channel [nick]]
  
   
   Voices a selected nick on a channel. If nick is not given,
   it will voice you. If channel and nick are not given,
   it will voice you on all channels you`re on, provided you
   have the rights to.
   
   By default, limited to AOPs or those with уровень 5 access
   and above on the channel, or to VOPs or those with уровень 3
   and above for self voicing.
  
  

• DEVOICE
  

   Syntax: /ChanServ  DEVOICE [#channel [nick]]
  
   
   Devoices a selected nick on a channel. If nick is not given,
   it will devoice you. If channel and nick are not given,
   it will devoice you on all channels you`re on, provided you
   have the rights to.
   
   By default, limited to AOPs or those with уровень 5 access
   and above on the channel, or to VOPs or those with уровень 3
   and above for self devoicing.
   
  

• HALFOP
  

   Syntax: /ChanServ  HALFOP [#channel [nick]]
  
   
   Halfops a selected nick on a channel. If nick is not given,
   it will halfop you. If channel and nick are not given,
   it will halfop you on all channels you`re on, provided you
   have the rights to.
   
   By default, limited to AOPs and those with уровень 5 access
   and above on the channel, or to HOPs or those with уровень 4
   and above for self halfopping.
  
  

• DEHALFOP
  

   Syntax: /ChanServ  DEHALFOP [#channel [nick]]
  
   
   Dehalfops a selected nick on a channel. If nick is not given,
   it will dehalfop you. If channel and nick are not given,
   it will dehalfop you on all channels you`re on, provided you
   have the rights to.
   
   By default, limited to AOPs and those with уровень 5 access
   and above on the channel, or to HOPs or those with уровень 4
   and above for self dehalfopping.
   
  

• PROTECT
  

   Syntax: /ChanServ  PROTECT [#channel [nick]]
  
   
   Protects a selected nick on a channel. If nick is not given,
   it will protect you. If channel and nick are not given,
   it will protect you on all channels you`re on, provided you
   have the rights to.
   
   By default, limited to the founder, or to SOPs or those with
   уровень 10 and above on the channel for self protecting.
  
  

• DEPROTECT
  

   Syntax: /ChanServ  DEPROTECT [#channel [nick]]
  
   
   Deprotects a selected nick on a channel. If nick is not given,
   it will deprotect you. If channel and nick are not given,
   it will deprotect you on all channels you`re on, provided you
   have the rights to.
   
   By default, limited to the founder, or to SOPs or those with
   уровень 10 and above on the channel for self deprotecting.
  
  

• OWNER
  

   Syntax: /ChanServ  OWNER [#channel]
  
   
   Gives you owner status on channel. If channel is not
   given, it will give you owner status on all channels you`re
   on, provided you have the rights to.
   
   Limited to those with founder access on the channel.
  
  

• DEOWNER
  

   Syntax: /ChanServ  DEOWNER [#channel]
  
   
   Removes your owner status on channel. If channel is
   not given, it will remove your owner status on all channels
   you`re on, provided you have the rights to.
   
   Limited to those with founder access on the channel.
  
  

• INVITE
  

   Syntax: /ChanServ  INVITE channel
  
   
  
   Tells ChanServ to invite you into the given channel.
   
   By default, limited to AOPs or those with уровень 5 and above
   on the channel.
  
  

• UNBAN
  

   Syntax: /ChanServ  UNBAN channel
   
   Tells ChanServ to remove all bans preventing you from
   entering the given channel.
  
   
   By default, limited to AOPs or those with уровень 5 and above
  
   on the channel.
   
  

• KICK
  

   Syntax: /ChanServ  KICK [#channel [nick [reason]]]
  
   
   Kicks a selected nick on a channel. If nick is not given,
   it will kick you. If channel and nick are not given,
   it will kick you on all channels you`re on, provided you
   have the rights to.
   
   By default, limited to AOPs or those with уровень 5 access
   and above on the channel.
  
  

• BAN
  

   Syntax: /ChanServ  BAN [#channel [nick [reason]]]
  
   
   Bans a selected nick on a channel. If nick is not given,
   it will ban you. If channel and nick are not given,
   it will ban you on all channels you`re on, provided you
   have the rights to.
   
   By default, limited to AOPs or those with уровень 5 access
   and above on the channel.
  
  

• TOPIC
  

   Syntax: /ChanServ  TOPIC channel [topic]
  
   
   Causes ChanServ to set the channel topic to the one
   specified. If topic is not given, then an empty topic
   is set. This command is most useful in conjunction
   with SET TOPICLOCK. See %RChanServ HELP SET TOPICLOCK
   for more information.
   
   By default, limited to those with founder access on the
   channel.
  
  
  

• CLEAR
  

   Syntax: /ChanServ  CLEAR channel what
   
   Tells ChanServ to clear certain settings on a channel.  what
   can be any of the following:
   
  
        MODES    Resets all modes on the channel (i.e. clears
  
                     modes i,k,l,m,n,p,s,t).
        BANS     Clears all bans on the channel.
        EXCEPTS  Clears all excepts on the channel.
        OPS      Removes channel-operator status (mode +o) from
                     all channel operators.
        HOPS     Removes channel-halfoperator status (mode +h) from
                     all channel halfoperators, if supported.
        VOICES   Removes "voice" status (mode +v) from anyone
  
                     with that mode set.
  
        USERS    Removes (kicks) all users from the channel.
   
   By default, limited to those with founder access on the
   channel.
   
  

• GETKEY
  

   Syntax: /ChanServ  GETKEY channel
   
  
   Returns the key of the given channel. This is a command
   mainly intended to be used by bots and/or scripts, so
  
   the output is in the following way:
   
   KEY <channel> <key>
   
   key is "NO KEY" if no key is set.
   
  

• SENDPASS
  

   Syntax: /ChanServ  SENDPASS channel
  
   
   Send the password of the given channel to the e-mail address
   set in the founder`s nickname record. This command is really
   useful to deal with lost passwords.
   
   May be limited to IRC operators on certain networks.
   
   This command is unavailable when encryption is enabled.
  
  

• SERVADMIN HELP
  

   
   Services admins can also drop any channel without needing
   to identify via password, and may view the access, AKICK,
  
   and уровень setting lists for any channel.
  
   
  

• SERVADMIN LOGOUT
  

   Syntax: /ChanServ  LOGOUT channel [nickname]
   
   This command will log the selected nickname out meaning they
   would have to reidentify themselves to regain their access.
  
   
  
   If you are the founder of the channel, you can log out anybody,
   else you can only log out yourself.
   
   If you are a Services admin, you can log out
   anybody of any channel without having to be the founder
   of the channel. Also, you can omit the nickname parameter;
   this will log out all identified users from the channel.
  
  

• SERVADMIN DROP
  

   Syntax: /ChanServ  DROP channel
  
   
   Unregisters the named channel.  Only Services admins
   can drop a channel for which they have not identified.
  
  

• SERVADMIN SET
  

   
   Services admins can also set the option NOEXPIRE, with
   which channels can be prevented from expiring.
   Additionally, Services admins can set options for any
   channel without identifying by password for the channel.
  
  

• SERVADMIN SET NOEXPIRE
  

   Syntax: /ChanServ  SET channel NOEXPIRE {ON | OFF}
  
   
   Sets whether the given channel will expire.  Setting this
   to ON prevents the channel from expiring.
   
   Limited to Services admins.
  
  

• SERVADMIN INFO
  

   
   Services admins can use the ALL parameter with any channel.
  
  

• SERVADMIN LIST
  

   Syntax: /ChanServ  LIST pattern [FORBIDDEN] [SUSPENDED] [NOEXPIRE]
  
   
   Lists all registered channels matching the given pattern.
   Channels with the PRIVATE option set will only be displayed
   to Services admins. Channels with the NOEXPIRE option set
   will have a ! appended to the channel name for Services admins.
   
   If the FORBIDDEN, SUSPENDED or NOEXPIRE options are given, only
  
   channels which, respectively, are FORBIDden, SUSPENDed or have
  
   the NOEXPIRE flag set will be displayed.  If both options are
   given, both types of channels will be displayed. These options are
   limited to Services admins.
  
  

• SERVADMIN GETPASS
  

   Syntax: /ChanServ  GETPASS channel
   
   Returns the password for the given channel.  Note that
  
  
   whenever this command is used, a message including the
   person who issued the command and the channel it was used
   on will be logged and sent out as a WALLOPS/GLOBOPS.
   
   Limited to Services admins.
  
  

• SERVADMIN FORBID
  

   Syntax: /ChanServ  FORBID channel [reason]
  
   
   Disallows anyone from registering or using the given
   channel.  May be cancelled by dropping the channel.
   
   Reason may be required on certain networks.
   
   Limited to Services admins.
  
  

• SERVADMIN SUSPEND
  

   Syntax: /ChanServ  SUSPEND channel [reason]
  
   
   Disallows anyone from registering or using the given
   channel.  May be cancelled by using the UNSUSPEND
   command to preserve all previous channel data/settings.
   
   Reason may be required on certain networks.
   
   Limited to Services admins.
  
  

• SERVADMIN UNSUSPEND
  

   Syntax: /ChanServ  UNSUSPEND channel
  
   
   Releases a suspended channel. All data and settings
   are preserved from before the suspension.
   
   Limited to Services admins.
  
  

• SERVADMIN STATUS
  

   Syntax: /ChanServ  STATUS channel nickname
  
   
   Returns the current access уровень of the given nick on the
   given channel.  The reply is of the form:
   
       STATUS channel nickname access-уровень
   
   If an error occurs, the reply will be in the form:
   
       STATUS ERROR error-message
  
   
   Limited to Services admins.